Universal auger extension Tonar USH-400.19 d20 mm
- Pickup from New Mail
- New Mail Courier
- Pickup from the store
- Other transport services
- Cash upon receipt
- Bank transfer
- Privat 24
- WebMoney
The extension is designed to increase the drilling depth of the TORNADO-M2 / BURAN / ICEBERG ice drill auger or the MOTOSHTORM motor auger auger, used for drilling holes in ice when fishing .
The output shaft of the extension has a diameter of 19 mm / 22 mm and 3 holes.
1. A 6.5mm hole is used for installation on all types of ice drills “TORNADO”, “BURAN” (for a wing screw with M6 thread).
2. An 8.5mm hole* is used for installation on all types of “ICEBERG” ice drills (for a special M6 wing screw).
3. An 8.5 mm hole** is used for installation on the augers of MOTOSHTORM motor drills (for M8 wing screw).
Motor drills can be connected to an extension with an output shaft diameter of 20 mm. For fastening, we recommend using fasteners (M8 nut, D8 washer, M8x35 screw). It is necessary to tighten the screw firmly, holding the M8 nut in one hand using an S13 key, and with the other hand tightening the M8x35 screw with a hex key. To connect the screwdriver to the extension cord, you must use an adapter (АШ-25У/ АШ-36У/ АШ-36УД) and an M8 wing screw.
Maximum increase in the length of the ICEBERG ice auger - 400 mm
Maximum increase in the length of the BURAN ice auger /TORNADO-M2/ auger MOTOSHTORM - 428 mm
Wing screw (thread parameter) - M8
Product weight - 0.72 kg.
Supply set:
Extension - 1 pc.
M8 wing screw - 1 pc.
M8 nut - 1 pc.
D8 washer - 1 pc.
M8x35 screw - 1 pc.
Spanner S13 - 1 pc.
Hex key S6 - 1 pc.
Instructions - 1 pc.
Package - 1 pc.
